DIY Spot Welding Machine for Lithium Battery Pack | 12V Battery Energy Storage Spot Welding PCB
This is a DIY version Spot Welding Machine that can be used for welding 18650/26650/32650 and other lithium batteries. You need your own 12V battery for the power supply. It is easy to weld the common 0.1mm-0.15mm nickel-plated sheet. The battery needs to have a current greater than 100A, to be able to do the proper welding.
Power supply voltage: 11.5V-14.8V
Caution: This module operates with high Current, high caution should be taken when using the module. Maintain a safe distance, insulate yourself and wear safety Goggles.
Important: The MOSFET on this module is highly sensitive, proper care should be taken while using it. This is a non-returnable product and no return request will be accepted.
Packing includes:
Circuit board x 1
Copper nose x 4
Screw x 3
A circle of 1-meter nickel sheet
Input wire x 2
Heat shrink tube x 2
This is a DIY version Spot Welding Machine that can be used for welding 18650/26650/32650 and other lithium batteries. You need your own 12V battery for the power supply. It is easy to weld the common 0.1mm-0.15mm nickel-plated sheet. The battery needs to have a current greater than 100A, to be able to do the proper welding.
Power supply voltage: 11.5V-14.8V
Caution: This module operates with high Current, high caution should be taken when using the module. Maintain a safe distance, insulate yourself and wear safety Goggles.
Important: The MOSFET on this module is highly sensitive, proper care should be taken while using it. This is a non-returnable product and no return request will be accepted.
Packing includes:
Circuit board x 1
Copper nose x 4
Screw x 3
A circle of 1-meter nickel sheet
Input wire x 2
Heat shrink tube x 2
Original: $12.39
-65%$12.39
$4.34Description
This is a DIY version Spot Welding Machine that can be used for welding 18650/26650/32650 and other lithium batteries. You need your own 12V battery for the power supply. It is easy to weld the common 0.1mm-0.15mm nickel-plated sheet. The battery needs to have a current greater than 100A, to be able to do the proper welding.
Power supply voltage: 11.5V-14.8V
Caution: This module operates with high Current, high caution should be taken when using the module. Maintain a safe distance, insulate yourself and wear safety Goggles.
Important: The MOSFET on this module is highly sensitive, proper care should be taken while using it. This is a non-returnable product and no return request will be accepted.
Packing includes:
Circuit board x 1
Copper nose x 4
Screw x 3
A circle of 1-meter nickel sheet
Input wire x 2
Heat shrink tube x 2
